Bearing Manufacturer | OEM & Global Supply

Single-Row Four-Point Contact Ball Slewing Bearings: Design, Working Principle and Applications

Updated: 16 Nov, 2026

Single-row four-point contact ball slewing bearings are widely used in industrial equipment that requires controlled rotation under combined loading conditions. With a single-row ball arrangement and a specially designed raceway profile, these bearings can accommodate axial loads, radial loads and tilting moments within a relatively compact structure.

They are commonly found in cranes, rotary tables, welding positioners, material handling equipment and various industrial rotary systems. Understanding their structure, working principle and configuration options helps equipment manufacturers select the right bearing for their operating conditions.

1. What Is a Single-Row Four-Point Contact Ball Slewing Bearing?

A single-row four-point contact ball slewing bearing consists of an inner ring, an outer ring, steel balls, spacers or a cage, and sealing components. Its raceways are designed with a Gothic arch profile, allowing each ball to make contact with the raceways at four potential contact points under the appropriate loading conditions.

Unlike conventional radial ball bearings, this slewing bearing is designed to support the combined loads commonly encountered in rotary machinery. Its single-row configuration provides a compact structure while maintaining the ability to accommodate axial and radial forces as well as overturning moments.

Depending on the equipment design, the bearing can be supplied with different mounting arrangements and gear configurations.

2. Working Principle and Four-Point Contact Structure

The defining feature of this bearing is its four-point contact raceway geometry. The inner and outer raceways are designed so that the steel balls can transmit loads through multiple contact areas.

Under axial loading, the contact points on opposite sides of the ball help transfer forces between the two rings. When radial loads or tilting moments are applied, the load distribution changes according to the direction and magnitude of the forces.

This design allows one bearing to accommodate several load directions without requiring separate bearing arrangements for every load component.

Engineering consideration: Actual load capacity and contact conditions depend on bearing dimensions, raceway geometry, internal clearance, mounting accuracy and operating conditions. Four-point contact does not mean that all four contact points carry equal loads simultaneously.

3. Main Structural Features

Single-Row Ball Arrangement

A single row of steel balls provides a relatively simple and compact internal structure. This arrangement is suitable for applications where installation space, overall dimensions and combined load capacity must be considered together.

Gothic Arch Raceway

The Gothic arch raceway profile creates the characteristic four-point contact geometry. Raceway design and manufacturing accuracy are important factors affecting load distribution, friction and bearing performance.

Gear and Gearless Configurations

Single-row four-point contact ball slewing bearings are available in three main configurations:

  • Gearless: Both rings have no integral gear teeth. External drive components are used to rotate the bearing assembly.
  • External Gear: Gear teeth are machined on the outside diameter of one ring to engage with an external drive pinion.
  • Internal Gear: Gear teeth are machined on the inside diameter of one ring, allowing the drive mechanism to be arranged within the bearing structure.

The appropriate configuration depends on installation space, transmission design, required rotation speed and equipment layout.

4. Typical Applications

Single-row four-point contact ball slewing bearings are used in equipment that requires smooth, controlled rotation while supporting combined loads.

Cranes and Lifting Equipment

Used in crane slewing mechanisms to support axial loads, radial forces and overturning moments generated during lifting and rotation.

Rotary Tables

Provide rotational support for industrial positioning systems, machine tools and other equipment requiring accurate rotary movement.

Welding Positioners

Support rotating workpieces and positioning assemblies in industrial welding systems.

Material Handling Equipment

Used in rotary handling systems and industrial machinery where stable rotation and combined load support are required.

For crane applications, see our crane slewing bearings solutions.

5. Single-Row Four-Point Contact vs. Other Slewing Bearings

Different slewing bearing structures are designed for different load combinations and equipment requirements. The main differences are related to rolling element arrangements, load distribution and structural design.

Bearing Type Rolling Elements Main Characteristics
Single-Row Four-Point Contact Ball One row of balls Compact design, supports combined loads
Single-Row Crossed Roller One row of crossed rollers High rigidity and accurate positioning
Double-Row Ball Two rows of balls Designed for different load distribution requirements
Three-Row Roller Three rows of rollers Separate roller rows accommodate different load components

The selection should be based on the actual axial load, radial load, overturning moment, rotational requirements and available installation space rather than bearing type alone.

6. How to Select a Four-Point Contact Ball Slewing Bearing

Choosing a suitable slewing bearing requires evaluating both the mechanical loads and the installation conditions. The following information is particularly important during the selection process.

  • Axial load: Determine the maximum axial force acting on the bearing during operation.
  • Radial load: Calculate the radial forces generated by the equipment and its working loads.
  • Tilting moment: Evaluate the overturning moment caused by load position, equipment structure and operating conditions.
  • Rotational speed: Confirm the required rotation speed, operating frequency and duty cycle.
  • Mounting dimensions: Check the inner diameter, outer diameter, overall height, mounting holes and bolt arrangement.
  • Gear configuration: Select gearless, external gear or internal gear according to the drive system.
  • Operating environment: Consider temperature, dust, moisture, vibration, lubrication and sealing requirements.

For replacement projects, the original bearing number, drawings, dimensional measurements and equipment information can help verify compatibility.

7. Manufacturing and OEM Replacement Solutions

For large industrial equipment, a slewing bearing is often designed around specific mounting dimensions and operating conditions. Replacing an existing bearing therefore requires more than matching the outer diameter and inner diameter.

JYHY Group manufactures single-row four-point contact ball slewing bearings in gearless, external gear and internal gear configurations. Its product range includes various sizes for industrial rotary equipment and OEM replacement applications.

For model selection and replacement inquiries, customers can provide:

  • Original bearing model or manufacturer part number
  • Inner diameter, outer diameter and overall height
  • Mounting hole dimensions and bolt arrangement
  • Gear type and gear parameters, if applicable
  • Equipment name and operating conditions
  • Existing bearing drawings or photographs

These details help engineers evaluate dimensional compatibility and identify a suitable replacement solution.

Explore our single-row four-point contact ball slewing bearing products for available models and specifications.

8. Frequently Asked Questions

What loads can a four-point contact ball slewing bearing support?

It is designed to accommodate axial loads, radial loads and tilting moments. The actual load capacity depends on its dimensions, internal design, mounting conditions and operating requirements.

What is the difference between gearless and geared slewing bearings?

Gearless bearings do not have integral gear teeth and rely on an external drive arrangement. Geared versions have either internal or external gear teeth for engagement with a drive pinion.

Can a single-row four-point contact ball slewing bearing replace another brand?

Replacement may be possible when the dimensions, mounting arrangement, load requirements and gear specifications are compatible. The original bearing number and technical drawings should be checked before confirming a replacement.

What information is needed for a custom slewing bearing inquiry?

Provide the bearing dimensions, mounting details, gear specifications, equipment application and operating loads. Existing drawings or an original bearing number are also helpful.

Conclusion

Single-row four-point contact ball slewing bearings offer a compact solution for industrial rotary equipment requiring support for combined axial, radial and tilting moment loads. Their gearless, external gear and internal gear configurations provide flexibility for different equipment designs.

Proper selection requires evaluating load conditions, mounting dimensions, drive arrangements and operating environments. For OEM projects and replacement applications, working from original drawings and equipment specifications helps ensure the selected bearing meets the actual requirements.

Contact JYHY Group to discuss your single-row four-point contact ball slewing bearing requirements.

Need Help Choosing the Right Bearing?

Get expert support and competitive pricing for your application.

WhatsApp Us
Fast response within 24 hours • OEM & Custom Support